This vacuum emulsifying machine consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams products.

Oil tank capacity 42L; water tank capacity 42L; primary pot capacity 60L, working volume 50L; limiting vacuum -0.09MPa. 

Size: Complete machine: 1500mm×600mm×1900-2500mm   

Oil and water tank: 1200mm×600mm×1100mm

Material: 304 stainless steel. Inner wall, jacket, outer layer all made by 304 stainless steel, inner and outer are polished, the surface handled by special light treatment.

Oil tank and water tank are both double deck, inner wall thickness 3mm, middle and outer thickness 2mm.

Heating system: interlayer electric heating power 4KW, the outer layer covers by asbestos to insulate heat, reducing heat lost and avoiding scalding employees.

Mixing system: both toil tank and water tank assemble disperser of 0.55KW, to make the water and oil heated more quickly and evenly.

Vacuum Emulsifying pot: made of three decks 304 stainless steel. Interlayer thickness 3mm, middle layer thickness 3mm, outer layer thickness 2mm, special light treatment The homogenizer is on the top of the emulsifying pot, adjustable time setting depends on the product homogenization need, voltage 380V, power 2.2KW, made in Shanghai and uses German technology, the highest speed 2800 rev / min. The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender  centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.

     Vacuum system: voltage 380V, power 0.75KW, materials in water tank and oil tank are absorbed into the primary pot in vacuum. The rotary-vanepump is made by Haibo Kang Company in Shanghai, which can remove the air bubble to improve the homogenizing effect.(circulating cooling by water)

Mixing system: voltage 380V, power 1.1KW, 10-120 rev / min. Monitoring with transparent filter, scraping the interlayer when mixing, frequency control.

Heating system: 6KW electric heating device attaching at the bottom. Heating with temperature display, easy to control.

Electric lifting: voltage 380V, power 1.1KW. Lifting is easy to operate, so the material can be effectively emulsified in a closed condition.

Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

50L emulsifying machine configuration table

(other size/volume can be customized)

Water Pot

Oil Pot